RflySimSDK v3.08
RflySimSDK说明文档
载入中...
搜索中...
未找到
mavlink_msg_log_erase.h
1#pragma once
2// MESSAGE LOG_ERASE PACKING
3
4#define MAVLINK_MSG_ID_LOG_ERASE 121
5
6MAVPACKED(
7typedef struct __mavlink_log_erase_t {
8 uint8_t target_system; /*< System ID*/
9 uint8_t target_component; /*< Component ID*/
10}) mavlink_log_erase_t;
11
12#define MAVLINK_MSG_ID_LOG_ERASE_LEN 2
13#define MAVLINK_MSG_ID_LOG_ERASE_MIN_LEN 2
14#define MAVLINK_MSG_ID_121_LEN 2
15#define MAVLINK_MSG_ID_121_MIN_LEN 2
16
17#define MAVLINK_MSG_ID_LOG_ERASE_CRC 237
18#define MAVLINK_MSG_ID_121_CRC 237
19
20
21
22#if MAVLINK_COMMAND_24BIT
23#define MAVLINK_MESSAGE_INFO_LOG_ERASE { \
24 121, \
25 "LOG_ERASE", \
26 2, \
27 { { "target_system", NULL, MAVLINK_TYPE_UINT8_T, 0, 0, offsetof(mavlink_log_erase_t, target_system) }, \
28 { "target_component", NULL, MAVLINK_TYPE_UINT8_T, 0, 1, offsetof(mavlink_log_erase_t, target_component) }, \
29 } \
30}
31#else
32#define MAVLINK_MESSAGE_INFO_LOG_ERASE { \
33 "LOG_ERASE", \
34 2, \
35 { { "target_system", NULL, MAVLINK_TYPE_UINT8_T, 0, 0, offsetof(mavlink_log_erase_t, target_system) }, \
36 { "target_component", NULL, MAVLINK_TYPE_UINT8_T, 0, 1, offsetof(mavlink_log_erase_t, target_component) }, \
37 } \
38}
39#endif
40
41/**
42 * @brief Pack a log_erase message
43 * @param system_id ID of this system
44 * @param component_id ID of this component (e.g. 200 for IMU)
45 * @param msg The MAVLink message to compress the data into
46 *
47 * @param target_system System ID
48 * @param target_component Component ID
49 * @return length of the message in bytes (excluding serial stream start sign)
50 */
51static inline uint16_t mavlink_msg_log_erase_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
52 uint8_t target_system, uint8_t target_component)
53{
54#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
55 char buf[MAVLINK_MSG_ID_LOG_ERASE_LEN];
56 _mav_put_uint8_t(buf, 0, target_system);
57 _mav_put_uint8_t(buf, 1, target_component);
58
59 memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_LOG_ERASE_LEN);
60#else
61 mavlink_log_erase_t packet;
62 packet.target_system = target_system;
63 packet.target_component = target_component;
64
65 memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_LOG_ERASE_LEN);
66#endif
67
68 msg->msgid = MAVLINK_MSG_ID_LOG_ERASE;
69 return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_LOG_ERASE_MIN_LEN, MAVLINK_MSG_ID_LOG_ERASE_LEN, MAVLINK_MSG_ID_LOG_ERASE_CRC);
70}
71
72/**
73 * @brief Pack a log_erase message on a channel
74 * @param system_id ID of this system
75 * @param component_id ID of this component (e.g. 200 for IMU)
76 * @param chan The MAVLink channel this message will be sent over
77 * @param msg The MAVLink message to compress the data into
78 * @param target_system System ID
79 * @param target_component Component ID
80 * @return length of the message in bytes (excluding serial stream start sign)
81 */
82static inline uint16_t mavlink_msg_log_erase_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
83 mavlink_message_t* msg,
84 uint8_t target_system,uint8_t target_component)
85{
86#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
87 char buf[MAVLINK_MSG_ID_LOG_ERASE_LEN];
88 _mav_put_uint8_t(buf, 0, target_system);
89 _mav_put_uint8_t(buf, 1, target_component);
90
91 memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_LOG_ERASE_LEN);
92#else
93 mavlink_log_erase_t packet;
94 packet.target_system = target_system;
95 packet.target_component = target_component;
96
97 memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_LOG_ERASE_LEN);
98#endif
99
100 msg->msgid = MAVLINK_MSG_ID_LOG_ERASE;
101 return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_LOG_ERASE_MIN_LEN, MAVLINK_MSG_ID_LOG_ERASE_LEN, MAVLINK_MSG_ID_LOG_ERASE_CRC);
102}
103
104/**
105 * @brief Encode a log_erase struct
106 *
107 * @param system_id ID of this system
108 * @param component_id ID of this component (e.g. 200 for IMU)
109 * @param msg The MAVLink message to compress the data into
110 * @param log_erase C-struct to read the message contents from
111 */
112static inline uint16_t mavlink_msg_log_erase_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_log_erase_t* log_erase)
113{
114 return mavlink_msg_log_erase_pack(system_id, component_id, msg, log_erase->target_system, log_erase->target_component);
115}
116
117/**
118 * @brief Encode a log_erase struct on a channel
119 *
120 * @param system_id ID of this system
121 * @param component_id ID of this component (e.g. 200 for IMU)
122 * @param chan The MAVLink channel this message will be sent over
123 * @param msg The MAVLink message to compress the data into
124 * @param log_erase C-struct to read the message contents from
125 */
126static inline uint16_t mavlink_msg_log_erase_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_log_erase_t* log_erase)
127{
128 return mavlink_msg_log_erase_pack_chan(system_id, component_id, chan, msg, log_erase->target_system, log_erase->target_component);
129}
130
131/**
132 * @brief Send a log_erase message
133 * @param chan MAVLink channel to send the message
134 *
135 * @param target_system System ID
136 * @param target_component Component ID
137 */
138#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS
139
140static inline void mavlink_msg_log_erase_send(mavlink_channel_t chan, uint8_t target_system, uint8_t target_component)
141{
142#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
143 char buf[MAVLINK_MSG_ID_LOG_ERASE_LEN];
144 _mav_put_uint8_t(buf, 0, target_system);
145 _mav_put_uint8_t(buf, 1, target_component);
146
147 _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ERASE, buf, MAVLINK_MSG_ID_LOG_ERASE_MIN_LEN, MAVLINK_MSG_ID_LOG_ERASE_LEN, MAVLINK_MSG_ID_LOG_ERASE_CRC);
148#else
149 mavlink_log_erase_t packet;
150 packet.target_system = target_system;
151 packet.target_component = target_component;
152
153 _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ERASE, (const char *)&packet, MAVLINK_MSG_ID_LOG_ERASE_MIN_LEN, MAVLINK_MSG_ID_LOG_ERASE_LEN, MAVLINK_MSG_ID_LOG_ERASE_CRC);
154#endif
155}
156
157/**
158 * @brief Send a log_erase message
159 * @param chan MAVLink channel to send the message
160 * @param struct The MAVLink struct to serialize
161 */
162static inline void mavlink_msg_log_erase_send_struct(mavlink_channel_t chan, const mavlink_log_erase_t* log_erase)
163{
164#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
165 mavlink_msg_log_erase_send(chan, log_erase->target_system, log_erase->target_component);
166#else
167 _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ERASE, (const char *)log_erase, MAVLINK_MSG_ID_LOG_ERASE_MIN_LEN, MAVLINK_MSG_ID_LOG_ERASE_LEN, MAVLINK_MSG_ID_LOG_ERASE_CRC);
168#endif
169}
170
171#if MAVLINK_MSG_ID_LOG_ERASE_LEN <= MAVLINK_MAX_PAYLOAD_LEN
172/*
173 This varient of _send() can be used to save stack space by re-using
174 memory from the receive buffer. The caller provides a
175 mavlink_message_t which is the size of a full mavlink message. This
176 is usually the receive buffer for the channel, and allows a reply to an
177 incoming message with minimum stack space usage.
178 */
179static inline void mavlink_msg_log_erase_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t target_system, uint8_t target_component)
180{
181#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
182 char *buf = (char *)msgbuf;
183 _mav_put_uint8_t(buf, 0, target_system);
184 _mav_put_uint8_t(buf, 1, target_component);
185
186 _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ERASE, buf, MAVLINK_MSG_ID_LOG_ERASE_MIN_LEN, MAVLINK_MSG_ID_LOG_ERASE_LEN, MAVLINK_MSG_ID_LOG_ERASE_CRC);
187#else
188 mavlink_log_erase_t *packet = (mavlink_log_erase_t *)msgbuf;
189 packet->target_system = target_system;
190 packet->target_component = target_component;
191
192 _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_LOG_ERASE, (const char *)packet, MAVLINK_MSG_ID_LOG_ERASE_MIN_LEN, MAVLINK_MSG_ID_LOG_ERASE_LEN, MAVLINK_MSG_ID_LOG_ERASE_CRC);
193#endif
194}
195#endif
196
197#endif
198
199// MESSAGE LOG_ERASE UNPACKING
200
201
202/**
203 * @brief Get field target_system from log_erase message
204 *
205 * @return System ID
206 */
207static inline uint8_t mavlink_msg_log_erase_get_target_system(const mavlink_message_t* msg)
208{
209 return _MAV_RETURN_uint8_t(msg, 0);
210}
211
212/**
213 * @brief Get field target_component from log_erase message
214 *
215 * @return Component ID
216 */
217static inline uint8_t mavlink_msg_log_erase_get_target_component(const mavlink_message_t* msg)
218{
219 return _MAV_RETURN_uint8_t(msg, 1);
220}
221
222/**
223 * @brief Decode a log_erase message into a struct
224 *
225 * @param msg The message to decode
226 * @param log_erase C-struct to decode the message contents into
227 */
228static inline void mavlink_msg_log_erase_decode(const mavlink_message_t* msg, mavlink_log_erase_t* log_erase)
229{
230#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
231 log_erase->target_system = mavlink_msg_log_erase_get_target_system(msg);
232 log_erase->target_component = mavlink_msg_log_erase_get_target_component(msg);
233#else
234 uint8_t len = msg->len < MAVLINK_MSG_ID_LOG_ERASE_LEN? msg->len : MAVLINK_MSG_ID_LOG_ERASE_LEN;
235 memset(log_erase, 0, MAVLINK_MSG_ID_LOG_ERASE_LEN);
236 memcpy(log_erase, _MAV_PAYLOAD(msg), len);
237#endif
238}
制作者 doxygen 1.11.0